※ 沒有振動盤,整機小巧,噪音小;
Without vibration feeding, the machine is smaller and the noise is lower ;
※ 根據產品特點,可以使用手持,也可以使用固定;
According to the object , you can use the hand-held qun or fixed qun ;
※ 使用連體料,使用壓縮空氣通過送料管將扎帶送入;
Use strip type cable tie, compressed air push the cable tie to the Tool via hose
※ 扣動或踩腳踏板,自動完成送料、卷帶、收緊、切斷,拋廢料等所有動作;
Pulling the trigger or tread the pedal , automatically Wrapping, Perforating, Pulling &
Tightening, Cut off, Collecting the waste material into waste tank.
※ 只要被捆扎物體直徑在設備的可捆扎的規格范圍內,設備自動適應不同直徑的物體,不需要為捆扎
不同大小的物體做任何調節。
The machine could bind the object with different diameters without any adiustment as long
as the object diameter is within the spec described in the table.
※ 1.2秒完成送料、卷帶、收緊、切斷,拋廢料等所有動作。
The whole operation takes only 1.2s.
※ 廢料通過專門的回收系統自動收集于廢料盒(可選配置):
Different waste material collecting methods for choice.
※ 手持*頭重量輕,握柄設計小巧,易于握持,長時間使用不會感覺疲勞;
Ergonomic hand shank design, comfortable to hold & operate.
※ 捆扎力度或松緊可通過旋鈕調節;
Binding force is adjustable by turning the knob.
※ 可配合機械手在自動生產線中實現全自動扎帶,也可固定于臺面作為臺式扎帶機使用;
Could be fixed as desktop type; and could be applied to full automation line.
※自動檢測堵料,如果發現堵料,機器立即停止運行,自動清理堵料,并自動啟動。
lf there is any cable tie jammed in the Tool or in the hose, the machine would stop running
and automatically clean the jammed cable tie, and then restart automatically.
手持式卷料自動扎帶機
面議
桌面式尼龍扎帶機
面議
自動卡丁扎帶機
面議
散裝尼龍扎帶
面議
連體尼龍扎帶
面議